Some MIPS patch need review and approval.

[Paul Hua]

Hi, GCC steering committee:

There are some MIPS patches that need to be reviewed and approved.

[PATCH v3 0/6] [MIPS] Reorganize the loongson march and extensions
instructions set. [1]
[PATCH v3 1/6] [MIPS] Split Loongson (MMI) from loongson3a. [2]
[PATCH v3 2/6] [MIPS] Split Loongson EXTensions (EXT) instructions
from loongson3a. [3]
[PATCH v3 3/6] [MIPS] Add Loongson EXTensions R2 (EXT2) instructions
support. [4]
[PATCH v3 4/6] [MIPS] Add Loongson 3A1000 processor support. [5]
[PATCH v3 5/6] [MIPS] Add Loongson 3A2000/3A3000 processor support. [6]
[PATCH v3 6/6] [MIPS] Add Loongson 2K1000 processor support. [7]
[PATCH v2] MIPS: Default to --with-llsc for the R5900 Linux target as well. [8]

[1] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00908.html
[2] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00912.html
[3] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00909.html
[4] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00910.html
[5] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00914.html
[6] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00911.html
[7] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00913.html
[8] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg01205.html


The MIPS Port Maintainer Matthew Fortune <***@gmail.com> seems to
have no activity for a long time.

Thanks.

Paul Hua.

[Paul Hua]

Ping ?

Post by Paul Hua
There are some MIPS patches that need to be reviewed and approved.
[PATCH v3 0/6] [MIPS] Reorganize the loongson march and extensions
instructions set. [1]
[PATCH v3 1/6] [MIPS] Split Loongson (MMI) from loongson3a. [2]
[PATCH v3 2/6] [MIPS] Split Loongson EXTensions (EXT) instructions
from loongson3a. [3]
[PATCH v3 3/6] [MIPS] Add Loongson EXTensions R2 (EXT2) instructions
support. [4]
[PATCH v3 4/6] [MIPS] Add Loongson 3A1000 processor support. [5]
[PATCH v3 5/6] [MIPS] Add Loongson 3A2000/3A3000 processor support. [6]
[PATCH v3 6/6] [MIPS] Add Loongson 2K1000 processor support. [7]
[PATCH v2] MIPS: Default to --with-llsc for the R5900 Linux target as well. [8]
[1] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00908.html
[2] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00912.html
[3] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00909.html
[4] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00910.html
[5] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00914.html
[6] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00911.html
[7] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00913.html
[8] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg01205.html
have no activity for a long time.
Thanks.
Paul Hua.

[m***@gmail.com]

Post by Paul Hua
Ping ?

Hi Paul,

I am very sorry to have missed your whole series and pings. I'm sorry to say
it has been an email mess on my side, I was a little surprised by just how
few MIPS issues were being raised. I know how frustrating it is when you get
no response on submissions.

I am no longer working on MIPS as a day job but am hoping I can help keep
things moving. If someone starts to contribute more widely to the MIPS
backend then the steering committee should of course consider appointing
further maintainers.

I don’t have email copies of your original patch posts so I'm not sure what
is best to work through them. I have skim read all 7 that you referenced and
they are generally in good shape.

I will send you some notes directly and go from there.

Thanks,
Matthew

Post by Paul Hua

Post by Paul Hua
There are some MIPS patches that need to be reviewed and approved.
[PATCH v3 0/6] [MIPS] Reorganize the loongson march and extensions
instructions set. [1] [PATCH v3 1/6] [MIPS] Split Loongson (MMI) from
loongson3a. [2] [PATCH v3 2/6] [MIPS] Split Loongson EXTensions (EXT)
instructions from loongson3a. [3] [PATCH v3 3/6] [MIPS] Add Loongson
EXTensions R2 (EXT2) instructions support. [4] [PATCH v3 4/6] [MIPS]
Add Loongson 3A1000 processor support. [5] [PATCH v3 5/6] [MIPS] Add
Loongson 3A2000/3A3000 processor support. [6] [PATCH v3 6/6] [MIPS]
Add Loongson 2K1000 processor support. [7] [PATCH v2] MIPS: Default
to --with-llsc for the R5900 Linux target as well. [8]
[1] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00908.html
[2] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00912.html
[3] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00909.html
[4] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00910.html
[5] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00914.html
[6] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00911.html
[7] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg00913.html
[8] https://gcc.gnu.org/ml/gcc-patches/2018-10/msg01205.html

seems to

Post by Paul Hua
have no activity for a long time.
Thanks.
Paul Hua.